top of page
OUR PRODUCTS > Booster Sets
Arbe AL Storage Calorifiers

Brochure Download

Format: PDF

Size: 4 mb

HB Standard Cold Water Booster Sets

​

The Arbe HevaBoost HB units offer an economical solution to water pressure boosting with many options and sizes available. The unit comprises of between 1 and 3 pumps with each pump being fitted with a frequency inverter.

 

The simple controls on the inverters require only 3 parameters setting for operation:

  • Maximum motor current

  • Working frequency

  • Working pressure

​

The booster set has 2 modes of operation:

  • Constant Pressure Mode: The booster set keeps the pressure constant when the quantity of water requested by the user changes

  • Fixed Speed Mode: The booster set works at a fixed speed that the user can choose according to the system need

 

The digital display on the inverters has various outputs available to display including:

  • Pressure of the system

  • Working frequency

  • Absorbed current

  • Alarms

 

The units are also supplied with isolating valves on the suction and discharge sides of the unit, check valves on the discharge side and stainless steel manifolds on 2 and 3 pump models.

​

The HB range has been designed to operate on 230v 1ph only, with pump sizes up to 2 kW, with sets available up to 10 litres/second and pressures up to 10 BarG

​

Please click on the image to the left to download our booster set brochure where you can size using our simple sizing charts.

Arbe AL Storage Calorifiers

Brochure Download

Format: PDF

Size: 4 mb

HBCA Advanced Cold Water Booster Sets

​

The Arbe HevaBoost HBCA units offer an economical solution to water pressure boosting with many options and sizes available. The unit comprises of between 1 and 6 pumps with each pump being fitted with a frequency inverter.

​

  • LCD display with 6 button interface for quick and simple menu navigation

  • Advanced settings are password protected

  • Digital inputs for 2 float switches and remote on/off control

  • Analog input for pressure transducer. 4-20mA or 0-10v can be selected

  • 2 programmable digital alarm outputs for connection to BMS

  • Digital output for remote parameter monitoring 

  • Protections include: Dry running / over-current / over heating / under and over voltage / short circuit on motor phase / electronic card over temperature / unbalanced phases / sensor error. All of which have their own error code displayed on the main screen

  • Safety start feature restarts the pumps after a power failure at a user defined frequency for a user defined amount of time to protect from pressure surges. For example 30Hz for 5 minutes.

  • Built in cyclic change over. iMAT automatically switches over duty pump after user defined length of time in constant operation. 

  • Maximum of 6 variable speed pumps can operate in parallel

  • Operating frequency, current draw, input voltage and system pressure can be displayed on main screen for quick system diagnostic

  • Last 10 error codes logged and can be viewed in chronological order

  • Constant pressure, constant flow, constant temperature, proportional pressure and manual fixed speed modes.

​

The HBCA range has been designed to operate on 400v 3ph with pump sizes up to 11 kW, with sets available with up to 6 pumps in cascade

bottom of page